GIR-3000 - 氣體偵測器 - 瓦斯偵測器(GAS)

氣體偵測器 GIR-3000

產品簡介


	氣體偵測器 GIR-3000 ▷防爆結構，易燃，CO2安裝在爆炸危險區域，CO，N2O氣體連續檢測 ▷應用紅外測量原理公式的新技術 ▷生活穩定超過5年之久 ▷安裝後，沒有維護費用，管理費用低 ▷提供氧氣的環境中不存在 ▷內置自診斷功能應用到微處理器 ▷6秒比的響應速度快 ▷帶有一個內置的返回光的LCD或OLED顯示器 1交談方式：採用LCD或OLED顯示屏和1▷磁棒遠程校準和程序設置 ▷2단報警和一個故障指示和繼電器觸點輸出 ▷的4-20mA DC輸出信號 ▷為RS-485的Modbus（隔離）串行通信和HART通信建立監測制度有利於 ▷爆炸式傳感器報警燈閃爍氣體探測器鏈接操作 - 正常：綠色LED - 報警：紅色LED，蜂鳴器操作（95分貝） - 故障：黃色LED ▷校準和維護由操作員1

產品規格

型號	GIR-3000
偵測種類	LNG，LPG，甲烷，丁烷，CO， CO2，N2O
測量類型	擴散型
測量方法	紅外線
測量範圍	0〜100％LEL 0〜5000PPM 0〜100％vo l0-2.0％0-5.0％VOL
傳感器使用壽命	5年以上
反應時間	<6秒/90％，<3秒/50％
精度	±3％
參數控制	非侵入式控制磁鐵棒（校準，維修，報警設置）
操作模式顯示	4-LED（電源，2級警報）
測量顯示	LCD顯示（內置背光2行16字）/ OLED
報警信號輸出	250V1A/3-SPST繼電器觸點（2級報警）
輸出信號	測量信號：4-20mA DC 維護信號：3毫安DC 校準信號：3毫安DC 故障信號：0毫安DC
數字輸出	RS-485的Modbus
有線	距離電源+信號線：三線>1.5sq（AWG16）/500米正常 RS-485數據通信電纜：1對（UL2919 RS-485）/ 1000M最大
管道連接	G. RC。 NPT 1/2“3/4”M20（G3/4“：標準）
安裝方式	壁掛式
工作溫度	-20℃〜+60℃/-40℃〜+80℃
工作濕度	RH5〜99％
操作電源	18〜31V DC（24V DC正常）/400毫安最大。
尺寸標準型	156 X323 X110（寬x高x深）mm
重量	3kg
防爆型	（Ex d型IIC T6）IP66/67 防爆型（Ex d IIC T4千兆〜T6）ATEX，IECEx認證防爆型（Ex d IIC T6千兆）NEPSI KR，MED，ABS，DNV KFI，CE，HART，SIL2

Specification

	SMART & LOCAL DISPLAY TYPE INFRARED GAS DETECTOR
Model	GIR-3000
Measuring gas	Hydrocarbon gases (LNG, LPG, Methane, Buthane & etc) CO2 CO, N2O
Measuring type	Diffusion type
Measuring method	Infrared type
Measuring range	0~100% LEL 0~5000ppm 0~100% Vol 0-2.0% Vol 0-5.0% Vol, 0~4000ppm
Sensor life time	Over 5 years
Response time	<6sec / 90% scale, <3sec / 50% scale
Accuracy	±3% / Full scale
Parameter control	Non intrusive control with a Magnet bar (calibration, maintenance, alarm setting)
Operation mode display	4-LED (Power, 2-stage alarm, 1-trouble)
Measuring value display	LCD display (Built-in back light 2-Line, 16 characters) / OLED Type (Option)
Alarm signal output	250V 1A / 3-SPST Relay contact (2-stage alarm, 1-trouble)
Output signal	Analog : Measuring signal : 4-20mA DC
	Maintenance signal : 3mA DC
	Calibration signal : 3mA DC
	Fault signal : 0mA DC
	Digital : RS-485 Modbus (Option)
	2mA (HART 7, HART Device Description Language available, Option)
Cable / Distance	Power + signal cable : 3 wire >1.5sq(AWG16) / 500m normal
Cable / Distance	RS-485 data communication cable : 1 pair (UL2919 RS-485) / 1000m max
Material	Housing : ALDC, SUS316(Option) / Sensor : SUS316
Conduit connection	G. Rc. NPT 1/2", 3/4" & M20 (G 3/4" : standard)
Mounting type	2" Pole mount, Wall mount, Duct mount
Operating temperature	-20℃ ~ +60℃ / -40℃ ~ +80℃ (Option)
Operating humidity	5 ~ 99% RH (non-condensing)
Operating power	18 ~ 31V DC (24V DC normal) / 400mA max.
Dimensions	156 X 323 X 110 (W X H X D)mm
Weight	3kg
Approval	Explosion proof type (Ex d IIC T6) KCs / IP66/67
	Explosion proof type (Ex d IIC Gb T4~T6) ATEX, IECEx
	Explosion proof type (Ex d IIC T6 Gb) NEPSI
	Marine : KR, MED, ABS, DNV
	KFI, CE, HART, SIL 2

Features

▷ installed in explosion hazardous areas as explosion-proof structure, combustible, CO2, CO, N2O gas is detected continuously
▷ apply new technology of infrared measurement principle equation
▷ stable over 5 years long life
▷ After installation, no maintenance costs, administrative costs low
▷ available oxygen in environments that do not present
▷ Built-in self-diagnostic function is applied to the microprocessor
▷ 6 seconds faster than the response speed of the
▷ with a built-in Back-light LCD or OLED display
▷ magnetic bar using LCD or OLED display and 1: 1 conversation way
Remote calibration and program settings
▷ 2 단 alarm and one fault indication and relay contact output
▷ 4-20mA DC output signal
▷ as RS-485 Modbus (isolated) Serial communication and HART communication
Establish a monitoring system facilitates
▷ Explosion-mounted sensor alarm and flashing light
Gas detectors are linked operation
- Normal: Green LED
- Alarm: red LED, buzzer operation (95dB)
- Trouble: yellow LED
▷ calibration and maintenance by the operator 1

型錄